EC-90 Cables
Standard Cables
   
  EC-90 POWER CABLES
Due to the additional features of the EC-90 series, many of the power cables are specific to the new design and are not intechangeable with older batteries. 12 volt cables wired pin 1 GND, pin 4 HOT are the exception. For more detailed information, please see the notes below and refer to the EC-90 owners manual.


6 VOLT XLR POWER CABLE
#X-J6V
$30.00

12 VOLT XLR POWER CABLE
#X-12V
$30.00
Apogee MINI-ME
12 VOLT
#210-12V
$28.00

Apogee MINI-ME
6 VOLT
#210-J6V
$28.00

LunaTEC V3
6 VOLT
#WA300
$30.00

LunaTEC V3
12 VOLT
#WA302
$30.00

Sound Devices
6 VOLT
#WA500
$30.00

Sony TCD-D7, TCD-D8, SBM-M1
6 VOLT
#240-J6V
$28.00
Fostex FR2 Recorder
12 VOLT
#FR2-12V
$39.00
Tascam DA-P1 DAT
6 or 7.5 VOLT
#JP1
$45.00
 

NOTES: To avoid compatibility problems, the EC-90 XLR output connectors are configured differently for each voltage. The 12 volt output is configured as industry standard pin 1 ground, pin 4 positive. All existing Eco-Charge 12 volt cables are compatible with the EC-90. The regulated output connector is configured differently to prevent voltage mismatching and potential equipment damage. This new wiring configuration requires a jumper in the power cable XLR connector to activate the regulator circuit. Therefore, previous 6 volt cables are not compatible with the EC-90 regulated output. We can modify your old cable if you do not wish to purchase a new power cable. Cables with a "J" in the part number are required for the new wiring configuration. See the EC-90 manual for more information.